Categories
Carbon Fiber

Painting the Case II

Carbon Fiber Joystick

Decided to paint the interior glossy black. The exterior received a first layer of clear coat. On top of it the case received 3 pin stripes in red and gold. When discussing the colors we decided for black, red and gold as their our national colors – made in germany. Pretty international project: Stick + buttons from japan, 360 PCB ordered in the UK, Chtulhu made in the USA.

Carbon Fiber Joystick

Categories
Carbon Fiber

Painting the Case I

Carbon Fiber Joystick

Preparing the case for the paint job. Initially the interior was not intended to be painted. But it also received a special treatment to increase its roughness to be able to mount parts on the inside. Trying to decide on a color, black is the first thing that springs to mind. But a colored contrast would be nice, too.

Categories
Carbon Fiber

Igor, Bring Me the Brain

Carbon Fiber Joystick

Finished the soldering job on the PCB interconnection. We started with the MadCatz 360 PCB. But then we couldn’t resist to go dual PCB and I ordered a Cthulhu from Toodles along with an Imp electronic switch. The Imp board (the small black PCB in the picture) switched to the 360 PCB when you press the guide button while plugging in the USB cord. So now we have a brain for the stick. Or two to be exact.

Categories
Carbon Fiber

Drilling the Holes

Carbon Fiber Joystick

The carbide plated hole saws finally arrived and were put to their use. The top right corner served as a guinea pig. Smooth sailing.